Blog

Study tips that actually help

Real strategies from real teachers and toppers. New post every week.

Molecular Basis of Inheritance Class 12 Biology Chapter 4 Questions And Answers Maharashtra Board
Class 12 | Biology Maharashtra Board Textbook Solutions
13 Apr 2026

Molecular Basis of Inheritance Class 12 Biology Chapter 4 Questions And Answers Maharashtra Board

Q. 1. Multiple Choice Questions 1. Griffith worked on ………….a. Bacteriophage b. Drosophilac. Frog eggs c. Streptococci Answer. (d) Streptococci 2. The molecular knives of DNA are …………..a. Ligases b. Polymerasesc. Endonucleases d. Transcriptase Answer. (c) Endonucleases 3. Translation occurs in the ………………..(a) Nucleus(b) Cytoplasm(c) Nucleolus(d) Lysosomes Answer. (b) Cytoplasm 4. The enzyme required for transcription is ………………a. DNA polymeraseb. RNA polymerasec. Restriction enzymed. RNAas Answer. (b) RNA polymerase 5. Transcription is the transfer of genetic information from …………..a. DNA to RNAb. tRNA to mRNAc. DNA to mRNAd. mRNA to tRNA Answer. (a) DNA to RNA 6. Which of the following is NOT part of protein synthesis?(a) Replication(b) Translation(c) Transcription(d) All of these Answer. (a) Replication 7. In the RNA molecule, which nitrogen base is found in place of thymine?(a) Guanine(b) Cytosine(c) Thymine(d) Uracil Answer. (d) Uracil 8. How many codons are needed to specify three amino acids?(a) 3(b) 6(c) 9(d) 12 Answer. (a) 3 9. Which out of the following is NOT an example of inducible operon?a. Lactose operonb. Histidine operonc. Arabinose operond. Tryptophan operon Answer. (d) Tryptophan operon 10. Place the following event of translation in the correct sequencei. Binding of met-tRNA to the start codon.ii. Covalent bonding between two amino acids.iii. Binding of second tRNA.iv. Joining of small and large ribosome subunits.A. iii, iv, i, ii B. i, iv, iii, iiC. iv, iii, ii, i D. ii, iii, iv, i Answer. (b) i, iv, iii, ii Q. 2. Very Short Answer Questions: 1. What is the function of an RNA primer during protein synthesis? Answer. During DNA replication, RNA primer provides 3’ OH to which DNA polymerase enzyme can add nucleotides to synthesize new strand using parental strand of DNA as template.[Note : RNA primer has no direct role in protein synthesis.] 2. Why the genetic code is considered as commaless ? Answer. The triplet codon are arranged one after the other on m-RNA molecule without any gap or space and therefore genetic code is considered as commaless. 3. What is genome? Answer. Genome is the total genetic constitution of an organism or a complete copy of genetic information (DNA) or one complete set of chromosomes (monoploid or haploid) of an organism. 4. Which enzyme does remove supercoils from replicating DNA? Answer. Super-helix relaxing enzyme (Topoisomerase) removes supercoils from replicating DNA. 5. Why are Okazaki fragments formed on lagging strand only? Answer. Okazaki fragments are formed only on lagging template as only short stretch of lagging template becomes available for replication at one time. 6. When does DNA replication take place? Answer. In eukaryotes DNA-replication takes place during S-phase of interphase of cell cycle and in prokaryotes. DNA replicates prior to cell division. 7. Define term- codon and codogen. Answer. Codogen is a triplet of nucleotides present on the DNA which specifies one particular amino acid.Codon is a triplet of nucleotides present on the m-RNA which specifies one particular amino acid. 8. What is degeneracy of genetic code? Answer. Genetic code is degenerate as 61 codons code for 20 amino acids, that is two or more codons can specify the same amino acid. E.g. Cysteine has two codons, while isoleucine has three codons. 9. Which are the nucleosomal ‘core’ histones? Answer. Two molecules each of histone proteins, viz. H2A. H2B, H3 and H4 are the nucleosomal ‘core’ histones. Q. 3. Short Answer Questions: 1. Write short note on DNA packaging in eukaryotic cell. Answer. 2. Enlist the characteristics of genetic code. Answer. The characteristics of genetic code are 3. Write a note on applications of DNA finger printing. Answer. Applications of DNA fingerprinting are as follows: 4. Explain the role of lactose in ‘Lac Operon’. Answer. Q. 4. Short Answer Questions: 1. Write a note on Human genome project (HGP). Answer. 1. Human Genome Project (HGP) was initiated in 1990 under the International administration of the Human Genome Organization (HUGO) and it was completed r in 2003. 2. The main aims: 3. Significance: 2. Describe the structure of ‘Operon’. Answer. 3. In the figure below A, B and C are three types of ________. Answer. A, B and C are A : m-RNA, B : r-RNA, C : t-RNA 4. Identify the labeled structures on the following diagram of translation. Part A is the ____________.Part B is the ____________.Part C is the ____________. Answer. Part A is the anti-codon.Part B is the amino acid.Part C is the larger subunit of ribosome. 5. Match the entries in column I with those of column II and choose the correct answer. Answer. Column I Column II A. Alkali treatment ii. Splits DNA fragments into single strands B. Southern blotting iii. DNA transferred to nitrocellulose sheet C. Electrophoresis i. Separation of DNA fragments on gel slab D. PCR vi. DNA amplification E. Autoradiography iv. X-ray photography F. DNA treated with REN v. Produce fragments different sizes Q. 5. Long Answer Questions: 1. Explain the process of DNA replication. Answer. DNA replication is semi-conservative replication. It involves following steps:Activation of Nucleotides: Point of Origin or Initiation point: Unwinding of DNA molecule: Replicating fork: Synthesis of new strands: Leading and Lagging strand: Formation of two daughter DNA molecules: 2. Describe the process of transcription in protein synthesis. Answer. Transcription involves three stages, viz. Initiation, Elongation and Termination.(1) Initiation: (2) Elongation: (3) Termination:When RNA polymerase reaches the terminator site on the DNA, both enzyme and newly formed m-RNA (primary transcript) gets released. 3. Describe the process of translation in protein synthesis. Answer. Translation involves the following steps:1. Activation of amino acids and formation of charged t-RNA (t-RNA – amino acid complex):i. In the presence of an enzyme amino acyl t-RNA synthetase, the amino acid is activated and then attached to the specific t-RNA molecule at 3’ end to form charged t-RNA (t-RNA – amino acid complex). ii. ATP is essential for the reaction. 2. Initiation of Polypeptide chain: 3. Elongations of polypeptide chain:Addition of amino acid occurs in 3 Step cycle-i. Codon recognition.Anticodon of second (and subsequent) amino acyl t-RNA molecule recognizes and binds with

Read article
Exogenetic Processes Part- 2 Class 9 Geography Chapter 4 Questions And Answers Maharashtra Board
Class 9 Social Science Maharashtra Board Textbook Solutions
26 Mar 2026

Exogenetic Processes Part- 2 Class 9 Geography Chapter 4 Questions And Answers Maharashtra Board

1. Rewrite the correct statement : (1) The temperature range helps the wind in its work. Answer. Correct: The temperature range helps the wind in its work by causing mechanical weathering, which creates loose particles for wind to carry. (2) River’s work is more prominent than other agents of erosion in desert regions. Answer. Incorrect, rewrite: Wind’s work is more prominent than other agents of erosion in desert regions. (3) The work of groundwater is effective in the area with soft rocks. Answer. Correct: The work of groundwater is effective in areas with soft rocks because it can dissolve and erode them easily. (4) The work of wind is not limited like river, glacier or the sea waves and takes place everywhere. Answer. Correct: The work of wind is not limited like rivers, glaciers, or sea waves and takes place everywhere, especially in open areas. 2. Correct and rewrite the incorrect statements : (1) The ice on the lateral side of the glacier moves faster than the ice at the base. Answer. Incorrect, rewrite: The ice at the base of the glacier moves faster than the ice on the lateral side due to less friction. (2) The depositional work by rivers happens because of gentle slope, reduced speed and transported sediments. Answer. Correct: The depositional work by rivers happens because of gentle slope, reduced speed, and transported sediments. (3) A river flows at a faster speed than the glacier. Answer. Correct: A river flows at a faster speed than the glacier. (4) The speed of the glacier is more on both the banks than in the middle. Answer. Incorrect, rewrite: The speed of the glacier is more in the middle than on both the banks due to less friction. 3. Identify the wrong pair : (1) Deposition – V–shaped valley Answer. Wrong: V-shaped valleys are formed by erosion, not deposition. (2) Transport – Ripple Marks Answer. Correct: Ripple marks are linked to the transport and deposition of sand by wind or water. (3) Erosion – Mushroom Rocks Answer. Correct: Mushroom rocks are formed by the erosional work of wind. 4. Identify and name the landforms in the following diagrams : Answer. (i) V-shaped valley, (ii) Gorge (canyon), (iii) Delta. 5. Complete the following table by classifying the landforms according to their agents of erosion.(waterfall, delta, cirque, arête, barchans, moraine, pothole, mushroom rock, sinkholes, beach, pillars, lagoons) Answer. Rivers Wind Glacier Sea waves Ground Water Waterfall Barchans Cirque Beach Sinkholes Delta Mushroom rock Aretes Lagoons Pillars Pothole Moraine 6. Answer the following questions in brief. (1) List the landforms that are a result of the erosional work of the rivers. Answer. Gorges (canyons), V-shaped valleys and waterfalls are the result of the erosional work of the rivers. (i) ‘V’ Shaped Valley: (ii) Gorge: (iii) Waterfall: (2) Which agent is responsible for formation of stalactites and stalagmites and where are they formed? Answer. (3) List the landforms that are produced by the depositional work of the sea waves. Answer. Answer:The landforms like beaches, sand bar, lagoons are formed due to depositional work of the sea waves.(i) Beach: (ii) Lagoon: (iii) Sand bars: (4) Name the types of moraines. Answer. The glaciers carry sediments with them. These sediments are called moraines. Depending ond the location of the deposits, moraines can be divided into 4 types: ground moraines, lateral moraines, medial moraines and terminal moraines.

Read article
The United Nations (UN) Class 9 Political Science Chapter 4 Questions And Answers Maharashtra Board
Class 9 Social Science Maharashtra Board Textbook Solutions
24 Mar 2026

The United Nations (UN) Class 9 Political Science Chapter 4 Questions And Answers Maharashtra Board

1. Choose the correct option from the given options and complete the statements.(1) This country is not a permanent member of United Nations Security Council –(a) America (b) Russia(c) Germany (d) China Answer. (c) Germany (2) This international organisation conducts workshops in India on remedial measures to tackle the problem of malnutrition among children –(a) UNICEF (b) UNESCO(c) Trusteeship Council (d) Redcross Answer. (a) UNICEF (3) The number of members of the United Nations –(a) 190 (b) 193(c) 198 (d) 199 Answer. (b) 193 2. State whether the following statements are true or false. Give reasons for your answer. (1) The United Nations General Assembly is a platform to discuss global problems. Answer. True. (2) The status of all the member nations of the United Nations is not equal. Answer. Answer:False. (3) A resolution can be passed even if China exercises its veto power. Answer. False (4) India has played a major role in the work of the United Nations. Answer. True. 3. Explain the following concepts. (1) Veto Answer. (i) Security Council has 5 permanent members and 10 non-permanent members.(ii) For any decision to be taken, the assent of all five permanent members and four non-permanent members is necessary.(iii) America, Russia, England, France and China are permanent members of the Security Council. They have the veto power.(iv) If even one of the five permanent member uses its veto i.e. gives a negative vote, the decision cannot be taken (2) UNICEF Answer. (i) UNICEF is an affiliated organisation of the United Nations.(ii) It works towards making nutritious food and health care available to children.(iii) Several workshops were organised in India to find out measures to overcome malnutrition among babies and children. 4. Answer in brief. (1) Write the reasons for the establishment of the United Nations. Answer. The United Nations is the world’s largest international organisation. The reasons for the establishment of the United Nations are: (i) Two World Wars were fought at the beginning of the twentieth century. (ii) Life and property were destroyed on a large scale in these wars. (iii) As a result, the League of Nations was established after the First World War and the United Nations was established after the Second World War out of a realisation that there has to be a mechanism to establish world peace. (iv) The League of Nations did not succeed at all. (v) But after the use of the nuclear weapons in the . Second World War, the idea took root that such destructive wars should be stopped and that it is the collective responsibility of all nations to do so. (vi) The United Nations was established after the Second World War to instill this understanding among all nations. (vii) Hence, the United Nations, an international organisation was established to ensure peace and security at the international level. (2) What is the role of the Peacekeeping Forces of the United Nations. Answer. (i) The peacekeeping activity of the United Nations involves creating appropriate circumstances favourable for bringing about permanent peace in strife-tom areas. (ii) The peacekeeping forces help these areas to progress towards peace. (iii) In conflict ridden areas, security is provided and at the same time, help is extended for establishing peace. (iv) The United Nations takes up peacekeeping as one of the tasks for safeguarding and fostering peace in the world. (3) Write the objectives of the United Nations. Answer. The United Nations has its own definite objectives. They are as follows: 5. Complete the following activity as per the given instructions.(1) Complete the following chart giving information about the organs of the United Nations. Answer. S.No. Organ Number of members Functions (1) UnitedNationsGeneral Assembly 193 (1) To elect the non-permanent members of the Security Council.(2) To choose the United Nations Secretary General and the judges of the International Court of Justice (ICJ) in consultation with the Security Council.(3) To pass the annual budget of the United Nations. (2) United Nations Security Council 15(5 Permanent and 10 NonPermanent) (1) To maintain international peace and security.(2) To prepare policies for arms control.(3) To play a joint role along with the General Assembly in the appointments of the judges of the International Court of Justice and of the United Nations Secretary General. (3) International Court of Justice 15 judges (1) To settle the disputes between two or more member nations of the United Nations.(2) To interpret international law authentically.(3) To advise the various organs or subsidiary bodies of the United Nations about legal issues. (4) Economic and Social Council 54 members (1) Initiate discussions at the global level on issues like poverty, unemployment, economic and social inequality and suggest policies to tackle these problems.(2) Discuss issues like women’s questions, empowerment of women, human rights, fundamental freedoms, global trade, health related issues, etc., and make decisions.(3) Make efforts to establish cultural and educational cooperation at the international level.(4) Coordinate the functioning of the different organisations working in association with the United Nations. (2) Show the chronology of the establishment of the United Nations. Answer. (3) Complete the following tree diagram about the United Nations. Answer.

Read article
Economic Development Class 9 History And Political Science Chapter 4 Questions And Answers Maharashtra Board
Class 9 Social Science Maharashtra Board Textbook Solutions
18 Mar 2026

Economic Development Class 9 History And Political Science Chapter 4 Questions And Answers Maharashtra Board

1. (A) Choose the correct option from the given options and complete the statements. (1) On 19th July 1969 ………. major banks in India were nationalised.(a) 12 (b) 14 (c) 16 (d) 18 Answer. (b) 14 (2) …………… declared a 20 point programme.(a) Pandit Nehru (b) Lal Bahadur Shastri (c) Indira Gandhi (d) P. V. Narsimha Rao Answer. (c) Indira Gandhi (B) Identify and write the wrong pair. (1) Kavasaji Davar – Iron and Steel factory(2) Dr Datta Samant – Leadership of mill workers(3) N. M. Lokhande – Holiday for mill workers(4) Narayan Survey – Depiction of lives of workers through poems Answer. Wrong Pair : Kavasaji Davar – Iron and Steel factory. 2. Complete the activity as per given instruction. (A) Complete the following chart. Answer. Five Year Plan Duration Purposes First 1951 -1956 Agriculture and Social Development Second 1956 -1961 Industrialisation Third 1961 -1966 Elimination of inequality, increasing opportunities for employment, increase in national income. Fourth 1969 -1974 Scientific research, health and family planning. Fifth 1974 -1979 Making India economically self-sufficient by alleviating poverty. (B) Write short notes on- (1) Mixed Economy Answer. (i) In a capitalist system, the means of production are privately owned. In a socialist economy, the means of production are owned by the State in the name of the society.(ii) A mixed economy works both in the private and the public sector.(iii) In order to achieve economic development of modem India, we gave preference to a model of ‘mixed economy’. We can see three parts in this kind of economy: (a) Public Sector: The industries in this sector are completely under the control and management of the government. For example, production of defence equipment. (b) Private Sector: The industries in this sector are owned by private industrialists. Of course, the government supervises and controls them too. For example, consumer goods. (c) Joint Sector: In this sector, some industries are owned by private industrialists, while some are run under government management. (iv) For mixed economy to run smoothly there is a need for co-ordination between the private sector and the public sector. (v) This system aims at maximisation of production and popular participation on a large scale. (vi) An effort has been made in this system to bring together the good aspects of both the capitalist and the socialist systems. (vii) A mixed economy cannot ignore the profit motive, entrepreneurship, discipline, time bound planning, etc. (2) 20-point Programme Answer. 20-Point Programme: Prime Minister Indira Gandhi announced the 20-Point Programme on 1st July 1975 and resolved to make efforts towards rapidly becoming a developed nation. The main provisions of the 20 point programme are as follows: 3. (A) Explain the following statements with reasons. (1) Independent India opted for mixed economy. Answer. (i) Our Prime Minister Pandit Nehru adopted the middle path rather than taking recourse to any extremes. Some countries had adopted Capitalism, while some had adopted Socialism. Each type of economy had its own advantages. (ii) In a capitalist system, the means of production are privately owned. In a socialist economy, the means of production are owned by the State in the name of the society. (iii) A mixed economy works both in the private and the public sector. In order to achieve economic development of modem India, we gave preference to a model of ‘mixed economy’. (2) Banks were nationalised in 1969. Answer. (i) During the tenure of Prime Ministers Pandit Nehru and Lai Bahadur Shastri, banking was a monopoly of the private sector. (ii) These banks represented different industrial groups. The Directors of these banks were working towards developing industrial sector and increasing its profit. (iii) In order to stop this, the government nationalised the ‘Imperial Bank’ in 1955 and it got converted into State Bank of India. (iv) This Bank opened several branches all over the country in a short while and played a major role in development. (v) India had adopted a mixed economy after independence. Nationalisation of banks was essential to cover the deficits if they occurred while implementing different schemes. (vi) Also the profit of these banks would come into the government treasury once they were nationalised. Prime Minister Indira Gandhi nationalised 14 banks on 19th July, 1969. (3) Mill workers went on strike. Answer. (i) During the Diwali of 1981, the workers expected to get a bonus of 20%. (ii) The Rashtriya Mill Mazdoor Sangh, which was negotiating with the employers, agreed upon 8 to 17% bonus without taking the workers into confidence. (iii) The cut in the bonus proved to be the cause of unrest. Some workers went to Dr. Datta Samant. (iv) They asked him to accept their leadership. Workers of 65 mills came together and Dr. Datta Samant led the strike. On 18th January 1982, two and a half lakh workers went on strike. (B) Answer the following questions in detail. (1) Which programmes were started in the 8th five-year plan? Answer. Following programmes were started in the Eighth Five Year Plan: (2) Which projects were started in the 2nd five-year plan ? Answer. (i) Iron and steel industries at Durgapur, Bhilai and Rourkela; Chemical fertilisers plant at Sindri; rail engine factory at Chittaranjan; factory of railway bogies at Perambur, Ship building factory at Vishakhapattanam and other heavy industries were set up in the Public Sector. (ii) Huge dams like Bhakra-Nangal, Damodar, etc. were built to make water available for agriculture.

Read article
Climate Class 10 Geography Chapter 4 Questions And Answers Maharashtra Board
Class 10 Social Science Maharashtra Board Textbook Solutions
11 Mar 2026

Climate Class 10 Geography Chapter 4 Questions And Answers Maharashtra Board

1. Write the names of the States/Regions in appropriate columns : Bihar, Tocantins, Pernambuco, Alagoas, Eastern Maharashtra, Western part of Rajasthan, Gujarat, Rio Grande Do Norte, Paraiba, Western Ghats, Eastern Himalayas, Western Andhra Pradesh, Roroima, Amazonas, West Bengal, Rio Grande Do Sul, Santa Catarina, Goa Answer. States/Regions India Brazil High rainfall Western Ghats, Eastern Himalayas, Goa Tocantins, Rio Grande Do Sul, Roraima Moderate rainfall Bihar, Eastern Maharashtra West Bengal Santa Catarina, Amazonas, Alagoas Low rainfall Western part of Rajasthan, Gujarat, Western Andhra Pradesh Pernambuco, Paraiba,Rio Grande Do Norte, Alagoas 2. State whether right or wrong. Rewrite the wrong sentences. (a) The fact that Brazil lies on the equator affects its climate in a big way. Answer. Right. (b) India and Brazil have the same seasons at the same time. Answer. Wrong – India and Brazil have different seasons at the same time. (c) India faces tropical cyclones frequently. Answer. Right. (d) Brazil gets a lot of rainfall because of the southwest monsoon winds. Answer. Wrong – Brazil gets rainfall from South-East Trade Winds and North-East Trade Winds. 3. Give geographical reasons: (a) The northeastern part of Brazilian Highlands receives very less rainfall. Answer. (i) Brazil gets rainfall from the South-East Trade Winds and the North-East Trade Winds.(ii) Parts of the Brazilian Highlands extend upto the northern coast.(iii) The Escarpments act as an obstruction to the winds blowing from the sea and cause orographic type of rainfall in the coastal region.(iv) Beyond the Highlands, the effect of these winds gets reduced. As a result, the rainfall is minimal.(v) Thus the North Eastern part of Brazilian highlands receives less rainfall. This rain shadow region is also called the ‘Drought Quadrilateral’. (b) Snowfall doesn’t always occur in Brazil. Answer. (i) Because of the vast latitudinal extent of Brazil, it experiences a wide range of climatic variations. Near the Equator it is hot, while tropical type of climate is found near the Tropic of Capricorn. (ii) Considering the temperatures in Brazil, the northern part of Brazil is hot while the temperatures in the southern part are comparatively lower. (iii) It generally snows in those areas lying in the temperate or polar regions or in the mountainous regions of very high altitude. (iv) Snowfall does occur but is only confined to higher elevations in the southern states of Rio Grande Do Sul, Parana and Santa Catarina. (v) Most part of the country lies in the tropical zone which experiences a hot and humid climate. So snowfall doesn’t always occur in Brazil and is considered a rare phenomenon. (c) Convectional type of rainfall is not prominent in India. Answer. (i) Convectional rains are a feature of the equatorial regions and the equator passes through the northern part of Brazil.(ii) Due to the intense heat here the air expands and rises upwards. As the air goes upwards it cools down, condensation occurs and clouds are formed. This leads to convectional rains every day.(iii) As such conditions do not exist in India, convection rainfall is not prominent here. (d) Tropical cyclones occur rarely in Brazil. Answer. (i) In the coastal regions of Brazil near the Equator, differences in temperatures are negligible.(ii) The winds move in the vertical direction in this equatorial region.(iii) Similarly, the convergence zone of the trade winds is weak here. As a result, cyclones are not formed.(iv) As a result tropical cyclones occur rarely in Brazil. (e) There is not much difference in the range of temperature in Manaus. Answer. (i) Manaus is located to the north of Brazil and close to the Equator.(ii) This region receives perpendicular rays of the sun throughout the year.(iii) It also receives convectional type of rainfall every day.(iv) So the climate is hot and humid throughout the year.(v) As, there is not much difference in the maximum and minimum temperatures there is not much difference in the range of temperature in Manaus. (f) India receives precipitation from the North-East Monsoon winds too. Answer. (i) In the winter season, India is influenced by the North East Monsoon Winds.(ii) These winds bring cool breeze to the country.(iii) While blowing over Bay of Bengal the North East Monsoon Winds pick up moisture and give rain to the eastern coast of Andhra Pradesh and Tamil Nadu in India.So, it is said that India receives precipitation from the North East Monsoon Winds too. 4. Answer the following questions: (a) Describe in brief the changes occurring in the climatic conditions of India while going from south to north. Answer. (i) India’s Climate is of monsoon type. But there is diversity in climatic conditions of India due to the latitudinal location and altitude of the place. (ii) As the Tropic of Cancer passes through middle of India, it divides the country into tropical region and sub tropical region. (iii) The tropical region receives nearly vertical rays of the Sun and the temperature increases as we move towards the south. (iv) In the sub tropical region of the north, summers are very hot and winters are very cool and dry. (v) The Himalayas lie in the northern part of India. They protects us from the cold winds that blow from the north, obstructs the South West Monsoon Winds which results in orographic rainfall in its southern slopes. (vi) In major parts of India precipitation is in the form of rainfall, but in the Himalayas it is in the form of snowfall. (b) Explain the importance of the Himalayas and the Indian Ocean with respect to the climate of India. Answer. (i) The Indian Ocean and the Himalayan ranges exert a great influence on the climate of India and the origin of monsoons. (ii) Because of high temperatures in summers, a low pressure area develops in the Punjab Plains and the Thar Desert of Rajasthan. (iii) At the same time a high pressure region develops over the Indian Ocean. (iv) This attracts winds and they start blowing from the Indian Ocean towards the mainland India. (v) These are moisture-laden winds which bring rainfall to India. (vi) These

Read article
Social and Political Movements Class 10 Political Science Chapter 4 Questions And Answers Maharashtra Board
Class 10 Social Science Maharashtra Board Textbook Solutions
10 Mar 2026

Social and Political Movements Class 10 Political Science Chapter 4 Questions And Answers Maharashtra Board

1. Choose the correct option from the given options and complete the sentences. (1) …………. is the main demand of farmers movement. (a) Right to cultivate on the forest land(b) To get the right price for agricultural product(c) Protection of consumers(d) Building of dams Answer. (b) To get the right price for agricultural products (2) To increase agricultural production and become self-sufficient with regard to food grains …………. was initiated. (a) Water revolution(b) Green revolution(c) Industrial revolution(d) White revolution Answer. (b) Green revolution 2. Explain the concepts. (1) Tribal movement Answer. Therefore, for these demands, Tribal Movement is active in many parts. (2) Labour movement Answer. 3. Answer the following questions in brief. (1) Explain the activities/role/functions of environmental movement. Answer. (i) Role : The environment movement rias played a key role in – (ii) Functions : The function of the environment movement is to make efforts silently or rigorously to protect natural areas through afforestation, recycling or pollution control. Forest department and the pollution board are actively involved and extend support by making stringent laws to book the culprits. (iii) Activities : Different activities are conducted to promote the environment movement: (2) Explain the nature of farmers movement in India. Answer. (3) For which reforms were the women’s movement in the pre-independence period fighting? Answer. In the pre-independence period women’s movement were working for the following reforms : 4. State wheather the following statements are true or false. Give reasons for your answer. (1) Movements are important in a democracy. Answer. The above statement is True. Hence, movements have great importance in democracy (2) Movements do not need a strong leadership. Answer. The above statement is False. (3) Consumer movement came into existence. Answer. The above statement is True.

Read article
History of Indian Arts Class 10 History Chapter 4 Questions And Answers Maharashtra Board
Class 10 Social Science Maharashtra Board Textbook Solutions
9 Mar 2026

History of Indian Arts Class 10 History Chapter 4 Questions And Answers Maharashtra Board

1. (A) Choose the correct option from the given options and complete the statement. (1) The arts of painting and sculpting are …………….……. . (a) visual arts(b) performing arts(c) folk arts(d) classical arts Answer. (a) visual arts (2) The …………….……. saw the rise of Mathura school. (a) Kushana period(b) Gupta period(c) Rashtrakuta period(d) Maurya period Answer. (a) Kushana period (B) Identify and write the wrong pair in the following set. (1) Qutub Minar – Mehrauli(2) Gol Gumbaz – Vijapur(3) Chhatrapati Shivaji Maharaj Railway Terminus – Delhi(4) Taj Mahal – Agra Answer. (3) Wrong Pair: Chhatrapati Shivaji Maharaj Railway Terminus – Delhi 2. Write short notes. (1) Art Answer. (2) Hemadpanti style Answer. (3) Maratha style of painting Answer. 3. Explain the following statements with reasons. (1) An expert with deep understanding of art history is required in the art market. Answer. (2) It is necessary to preserve the tradition like Chitrakathi, which is on the verge of extinction. Answer. 4. Complete the following table. Answer. Styles of Temple Architecture Nagara Dravid Hemadpanti Characteristics (1) Series of miniature towers are arranged(2) Towers taper towards the top(3) Tower appears to be continuously rising from the base of the temple to the top. (1) Temple towers resembled pyramid shape.(2) Gopura (main entrance) was large and magnificent than the tower.(3) Mythological stories were carved on walls and ceilings. (1) The temple structure was star-shaped with outer walls having zigzag design.(2) The walls were built without using any mortar.(3) The stones were locked by using the technique of tenon and mortise joints. Examples (1) Konark Sun Temple(2) Lingraj Temple of Bhubaneshwar(3) Kandariya Mahadev temple at Khajuraho (1) Meenakshi Temple at Madurai(2) Chariot Temple at Mahabalipuram(3) Brihadeeshvara temple at Thanjavur(4) Tirupati Temple (1) Gondeshwar temple at Sinnar(2) Ambreshwar temple at Ambarnath(3) Aundha Nagnath temple at Hingoli(4) Kopeshwar temple at Khidrapur 5. Answer the following questions in detail. (1) Write in detail about folk styles of painting. Answer. (2) Explain the characteristics of the Islamic architecture in India by giving examples. Answer. A blend of Persian, Central Asian, Arabic and pre Islamic native Indian styles created the Islamic architecture of India.Following are the characteristics of Islamic architecture developed in the medieval period under the patronage of Muslim sultanates: (3) What kind of professional opportunities are available in the field of arts? Answer. Various opportunities are available in different fields of art: (4) Observe the illustration of Warli painting on p. 23 and write about: (a) Depiction of nature(b) Drawings of human figures(c) Depiction of occupations(d) Houses Answer. The traditions of Warli painting and Pingul or Chitra Kathain Maharashtra are among the finest examples of folk style of paintings. Divya Somya Mashe, the artist in Thane district has played a great role in making the Warli style of paintings very popular. He has been honored with a number of national and international awards for his paintings. In the year 2011, he was awarded ‘Padmashree’. Name of the painting tradition:This picture is from Warli tradition. Nature’s description:Artist has sketched trees, leaves and shrubs in the picture. A fish is also drawn. Sketch of human activities:Women dancing in a circular pattern is also sketched in the picture. Designing features:Pictures of men, women and children are sketched. Warli paintings do not portray the exact objects but only a sketch. Human figures are drawn with the help of a triangle, circle and square which are placed at the tip.

Read article
Environmental management Class 10 Science 2 Chapter 4 Questions And Answers Maharashtra Board
Class 10 Science Maharashtra Textbook Solutions
7 Mar 2026

Environmental management Class 10 Science 2 Chapter 4 Questions And Answers Maharashtra Board

1. Reorganize the following food chain. Describe the ecosystem to which it belongs. Grasshopper – Snake – Paddy field – Eagle – Frog. Answer. Paddy field represents the primary producer which are plants. Grasshopper is a primary consumer. Primary consumers are organisms that eat the primary producers and are usually herbivores. Frog is a secondary consumer. Secondary consumers are organisms that eat the primary consumers and are generally meat-eaters/carnivores. Snake is a tertiary consumer. Tertiary consumers are organisms that eat the secondary consumers. These organisms are carnivore-eating carnivores, like snakes or big fish. Eagle is a quaternary consumer and in this case it is the apex consumer because it occupies the highest position in the food chain. 2. Explain the statement- ‘we have got this Earth planet on lease from our future generations and not as an ancestral property from our ancestors.’ Answer. The statement that “we have got this Earth planet on lease from our future generations and not as an ancestral property from our ancestors” highlights the fact that the planet is not entirely the property of the current generation. Rather, it is our shared past that we need to preserve for future generations. In order to guarantee that future generations will have access to natural resources, it highlights how important it is for the current generation to use them responsibly. Using resources to meet current demands without sacrificing the capacity of future generations to meet their own needs is known as sustainable development. This idea is especially crucial for fast decreasing non-renewable resources like coal and petroleum. We can make sure that these resources are used wisely and maintain long-term environmental stability by balancing development and conservation through sustainable development. 3. Write short notes. a. Environmental Conservation. Answer. Since existence of human, there is interrelationship between human and environment. Human stepped on the Earth long after formation of Earth. On the Earth, human being proved its superiority as compared to other animals with the help of characters like intelligence, memory, imaginary ability, etc. Human established domination over the nature. Human utilized all the natural resources as much as possible. In an attempt to live a satisfactory life, human kept on snatching from the nature as much as possible and this led to increase in problems. From this entire scenario, we can understand that human has crucial role in maintaining the environmental balance. If human has disturbed the environmental balance, then human itself only can conserve and improve the quality of nature. b. Chipko Movement of Bishnoi. Answer. c. Biodiversity. Answer. Biodiversity refers to the combined diversity at all levels of biological organisation. It includes genetic diversity, species diversity and ecological diversity. Importance of biodiversity: (i) A wide range of materials such as fibres, dyes, resins are obtained from plants. (ii) A variety of plants and animals are utilised as sources of food. (iii) Medicinal plants act as sources of drugs. (iv) Plants and animals also have a cultural and aesthetic value. d. Sacred Groves. Answer. e. Disaster and its management. Answer. 4.How will you justify that overcoming the pollution is a powerful way of environmental management ? Answer. 1. Pollution is created only due to human activities. Air, water, soil, noise, radiation, thermal, light, plastic are different types of pollution.2. All types of pollution affect environment and particularly threatening the survival of living organisms.3. Pollution must be controlled in order to have good quality of the environment. E.g. When plastic is thrown anywhere, it causes pollution of the land, it clogs the rain water drains, it affects feeding of the animals. Plastic pollution can be completely stopped by us through proper management of plastic waste. By recycling or reusing, we can overcome the plastic pollution. This would be a powerful way of environmental management.4. Similarly, when we reduce pollution of different types, we automatically help to regain the environmental health. 5.Which projects will you run in relation to environmental conservation? How? Answer. Initially, assessment of the environmental problems will be done. The nature and severity of these problems will be understood by detailed study of the same. Then the projects can be undertaken to combat these problems. 1. Tree plantation is one such easier project that can be undertaken to conserve environment. The further nurturing of the tree will also be our responsibility. While selecting the tree, the local and sturdy varieties will be selected. Such trees can survive in polluted environment too and even under the pressure of urbanization. 2. Solid waste management is another very important project that should be undertaken by every society, colony or school. Segregation of waste into dry and wet types and then its proper disposal will be taught to all the people in the neighbouring area. 3. To ban the plastic and make people aware about harmful effects of plastic is another very significant project. 4. Fossil fuels are non-renewable and polluting. Therefore, their use should be reduced as far as possible. Therefore, using bicycle, or walking down for shorter distances or using public transport systems are the better alternatives. The awareness drive about these facts will be taken up as a project. 5. To take care of stray animals, provide shelter, feeding endangered birds like sparrows and allowing them to survive with our support is also one of the essential act to conserve other species. 6. Answer the following. a. Write the factors affecting environment. Answer. b. Why does the human beings have important place in environment ? Answer. c. Write the types and examples of biodiversity. Answer. There are 3 types of diversity which are as follows: d. How the biodiversity can be conserved? Answer. Biodiversity can be conserved by the following ways: e. What do we learn from the story of Jadav Molai Peyang? Answer. f. Write the names of biodiversity hot spots. Answer. A biodiversity hotspot is a biogeographic region with significant levels of biodiversity that is threatened with destruction. For example, forests are considered biodiversity hotspots. The Status is designated by Conservation International. To qualify as a biodiversity hotspot on

Read article
Effects of electric current Class 10 Science 1 Chapter 4 Questions And Answers Maharashtra Board
Class 10 Science Maharashtra Textbook Solutions
2 Mar 2026

Effects of electric current Class 10 Science 1 Chapter 4 Questions And Answers Maharashtra Board

1. Tell the odd one out. Give proper explanation. a. Fuse wire, bad conductor, rubber gloves, generator. Answer. Generator. It converts mechanical energy into electric energy, the remaining three do not. b. Voltmeter, Ammeter, galvanometer, thermometer. Answer. Thermometer. It measures temperature, the remaining three measure electrical quantities. c. Loud speaker, microphone, electric motor, magnet. Answer. Magnet. It exerts a force on a magnetic material, the remaining three convert one form of energy into another. 2. Explain the construction and working of the following. Draw a neat diagram and label it. a. Electric motor Answer. Figure shows the construction of an electric motor. Here, a rectangular loop ABCD of copper wire with resistive coating is placed between the north pole and south pole or a strong magnet, such as a horseshoe magnet, such that the branches AB and CD are perpendicular to the direction of the magnetic field. The ends of the loop are connected to the two halves, X and Y, of split rings X and Y have resistive coating on their inner surfaces and are tightly fitted on the axle. The outer conducting surfaces of X and Y are in contact with two stationary carbon brushes, E and F, respectively. Working:1. When the circuit is completed with a plug key or switch, the current flows in the direction E → A → B → C → D → F. As the magnetic field is directed from the north pole to the south pole, the force on AB is downward and that on CD is upward by Fleming’s left hand rule. Hence, AB moves downward and CD upward. These forces are equal in magnitude and opposite in direction. Therefore, as observed from the side AD, the loop ABCD and the axle start rotating in anticlockwise direction. 2. After half a rotation, X and Y come in contact with brushes F and E respectively and the current flows in the direction EDCBAF. Hence the force on CD is downward and that on AB is upward. Therefore, the loop and the axle continue to rotate in the anticlockwise direction. 3. After every half rotation, the current in the loop is reversed and the loop and the axle continue to rotate in anti clockwise direction. When the current is switched off, the loop stops rotating after some time. b. Electric Generator(AC) Answer. Figure shows the construction of an AC electric generator. Here, a coil ABCD of copper wire is kept between the pole pieces (N and S) of a strong magnet. The ends of the coil are connected to the conducting rings R1 and R2 via carbon brushes B1 and B2. The rings are fixed to the axle and there is a resistive coating in between the rings and the axle. The stationary brushes are connected to a galvanometer used to show the direction of the current in the circuit. Working:When the axle is rotated with a machine from outside, the coil ABCD starts rotating. Suppose the coil rotates in clockwise direction, as observed from the side AD. Then as the branch AB moves upward, the branch CD moves downward. By Fleming’s right hand rule, the induced current flows in the direction A → B → C → D and in the external circuit, it flows from B2 to B, through the galvanometer. The induced current is proportional to the number of turns of the copper wire in the coil. After half a rotation, AB and CD interchange their places. Hence, the induced current flows in the direction D → C → B → A. As AB is always in contact with B1 and CD is in contact with B2, the current in the external circuit flows from B1 to B2 through the galvanometer. Thus, the direction of the current is the external circuit is opposite to that in the previous half rotation. The process goes on repeating and alternating current is generated. 3. Electromagnetic induction means- a. Charging of an electric conductor.b. Production of magnetic field due to a current flowing through a coil.c. Generation of a current in a coil due to relative motion between the coil and the magnet.d. Motion of the coil around the axle in an electric motor. Answer. c. Generation of a current in a coil due to relative motion between the coil and the magnet. 4. Explain the difference: AC generator and DC generator. Answer. AC generator: DC generator: 5. Which device is used to produce electricity? Describe with a neat diagram.a. Electric motorb. Galvanometerc. Electric Generator (DC)d. Voltmeter Answer. Electric generator (DC). Figure shows the construction of a DC generator.Working: The axle is rotated with a machine from outside. When the armature coil of the generator rotates in the magnetic field, electric potential difference is produced in the coil due to electromagnetic induction. This produces a current as shown by the glowing of the bulb or by a galvanometer. The direction of the current depends on the sense of rotation of the coil. In a DC generator, one brush is always in contact with the arm of the coil moving up while the other brush is in contact with the arm of the coil moving down in the magnetic field. Hence, the flow of the current in the circuit is always in the same direction and the current flows so long as the coil continues to rotate in the magnetic field. [Note In the case of a DC generator, the current is in the same direction during both the halves of the rotation of the coil. The magnitude of the current does vary periodically with time. In this respect, it differs from the current supplied by an electric cell.] 6. How does the short circuit form? What is its effect? Answer. If a bare live wire (phase wire) and a bare neutral wire touch each other (come in direct contact) or come very close to each other, the resistance of the circuit becomes very small and hence huge (very high) electric current flows through it. This condition is called a

Read article
Page 1 of 2